You are here: Home • Exhaust • Exhaust Accessories • Circuit Sport Exhaust Hanger Bushing Kit...
Circuit Sport Exhaust Hanger Bushing Kit (Set of 3)
  |
|
 Latest Install Images Product Reviews
Product Quick LinksProduct description Vehicle Applications See Installed Images Product reviews Customers also bought... |
|||||||||||||||||||
Circuit Sports Exhaust Hanger Bushings replaces your worn factory hanger bushings. These bushings are 50% stiffer than the stock bushings. With the extra stiffness, the exhaust system will be held in place while driving and will cause less chances of any exhaust leaks because vibration and movement of the exhaust system is greatly decreased with new bushings. A very affordable and cheap upgrade. Recommended when installing new exhaust systems! One set comes with 3 exhaust hanger bushings!
For 1989-1994 Nissan 240SX, there is a total of three exhaust hanger bushings to be replaced (one set needed).
For 1996-1998 Nissan 240SX, there is a total of four exhaust hanger bushings to be replaced (two sets needed).
Part #: CircuitSport_MHB-001-GD
Customers Who Purchased This Item Also Purchased
 · Increase steering feedback · Replace old rubber bushings · Recommended to do w/ tie rod  · Multi-layered compressed metal · High quality thick metal gaskt · OEM quality and construction  · Stud between turbine and elbow · 8mm - 1.25 pitch · Price per stud  · Copper locking Nut · 8mm - 1.25 pitch · Price per nut  · Stainless steel · Firmer clutch feel · Bypasses stock dampener  · Reduces heat transfer · Increases intake volume · Increases horsepower  · Holds 4.5 quarts of oil · Has a port for oil temp sensor · Lessens oil movement in turns  · Gathers metal shavings · Improve oil effiency · Add engine protection |
Customer Installs & Images| Submitted by Kyle on Mar 25, 2008 |
| Perfect fit and high quality bushings are direct fit with a straight forward install the two in the middle and 3/4 of the way to the back, they require a 14mm wrench and sometimes they need to be "helped out" but are easily replaced by a M8 x 1.25 SS bolt. |
  |
